Pictures/Diagrams of P1 driving lights

[mign555]

Hi everyone,

I've received a set of P1 driving lights with the surrounds, mounting brackets and other associated parts. Had them sent over from the UK (live in Australia) and I wasn't able to get an assembly drawing or instructions from Cheam motors or Prodrive (either they wouldn't or couldn't provide them).

I've tried searching the forums, but had no luck, and would greatly appreciate any assistance if someone could point me in the right direction. I'm after detailed pictures of the lights mounted in the front bumper (with the surrounds removed), assembly diagrams or instructions that I could use.

I'm not sure on the following:
- Orientation of the bracket for the lights (3 leg metal bracket)
- How to mount the lamp to the bracket using the 3 screws and clips (not sure how to secure the position adjustment screws to the lamp, or to the bracket)
- Position of the lamps (behind the bracket or in front? Should they be recessed in relation to the foglight surround?

Could really use some help, thanks.

Mike

[marky mark]

these are the only pics i have (ignore the bright shiny pipe at the botom as that is intercooler piping that you probably wont have.

TBH. its straightforward, they just bolt in. the adjusting legs on the back of the lamps fit through holes in the bumper, and there is 3 bolts holding them on.

the bracket for attaching the covers sits in a little recess.

http://img.photobucket.com/albums/v331/p1mark/fmicguide6.jpg

http://img.photobucket.com/albums/v331/p1mark/FMIC9.jpg

[mign555]

Thanks for the pics, helped me out a lot.

{Figured it all out now}